BlackHole 3.0.8 vusolo2
vusolo2 login: root
root@vusolo2:~# dmesg
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
usb 2-1: new high-speed USB device number 2 using ehci-brcm
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Success! Registering the characther device success with 0
blackhole initialised
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000001380000
nand_read_bbt: bad block at 0x000002be0000
nand_read_bbt: bad block at 0x000005060000
nand_read_bbt: bad block at 0x0000050a0000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000001f00000-0x000010000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
usb 1-1: new high-speed USB device number 2 using ehci-brcm
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1:1.0
random: nonblocking pool is initialized
usb 2-1.1: new high-speed USB device number 3 using ehci-brcm
usb 2-1.2: new high-speed USB device number 4 using ehci-brcm
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 4 ports detected
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 1793, bad PEBs: 7, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 1642/459, WL threshold: 4096, image sequence number: 1317694460
UBI: available PEBs: 0, total reserved PEBs: 1793, PEBs reserved for bad PEB handling: 33
UBI: background thread "ubi_bgt0d" started, PID 55
ALSA device list:
No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 58
UBIFS: recovery needed
scsi 2:0:0:0: Direct-Access General USB Flash Disk 1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7C7FB65B-0240-40DC-9FD0-B1B25984D821, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 192K (80760000 - 80790000)
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
udevd[85]: starting version 182
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
rtusb init rt2870 --->
=== pAd = e0368000, size = 511144 ===
usbcore: registered new interface driver rt2870
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
procmk_init
bcm_event: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (_vuplus_solo2_)
bcm7356: hotplug_callback():
Hotplug - status.connected 1:0:0
bcm7356: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
[GP]:brcm_pwm_init
brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[MPVR]: >> misc_pvr_init
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI_Malloc(linuxkernel) top users:
blocks, bytes, filename:line
1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
601, 132308, BSEAV/lib/utils/balloc.c:31
388, 24832, magnum/commonutils/mrc/src/bmrc_monitor.c:666
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
0:0
[CI]: registered ci0
[CI]: CI interface initialised
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4
[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1 0
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0 0
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
RTMP_TimerListAdd: add timer obj e03afa78!
RTMP_TimerListAdd: add timer obj e03afaa8!
RTMP_TimerListAdd: add timer obj e03afad8!
RTMP_TimerListAdd: add timer obj e03afa48!
RTMP_TimerListAdd: add timer obj e03af9b8!
RTMP_TimerListAdd: add timer obj e03af9e8!
RTMP_TimerListAdd: add timer obj e037a5ec!
RTMP_TimerListAdd: add timer obj e0369de4!
RTMP_TimerListAdd: add timer obj e0369e1c!
RTMP_TimerListAdd: add timer obj e037a690!
RTMP_TimerListAdd: add timer obj e037a58c!
RTMP_TimerListAdd: add timer obj e037a65c!
-->RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 5
2. Phy Mode = 5
NVM is Efuse and its size =2d[2d0-2fc]
phy mode> Error! The chip does not support 5G band 15!
RTMPSetPhyMode: channel is out of range, use first channel=1
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
3. Phy Mode = 9
AntCfgInit: primary/secondary ant 0/1
AsicSetRxAnt, switch to main antenna
MCS Set = ff 00 00 00 01
0x1300 = 00064300
===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 940
==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=1)
Rcv Wcid(1) AddBAReq
Start Seq = 00000000
RTMP_TimerListAdd: add timer obj e03e031c!
RTMP_TimerListAdd: add timer obj e03de308!
Rcv Wcid(1) AddBAReq
Start Seq = 00000000
RTMP_TimerListAdd: add timer obj e03e0374!
NET: Registered protocol family 10
RTMP_TimerListAdd: add timer obj e03de348!
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1 0
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0 0
[LCD]: unknown cmd 0x1015
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -862249488
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER -862249488
[AUD]: AUDIO_SET_MIXER : amixl 13, amixr 13
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER : next left volume -998, right volume -998
usb 2-1.4: new high-speed USB device number 5 using ehci-brcm
input: ITE Technologies, Inc. USB Deivce as /devices/platform/ehci-brcm.1/usb2/2-1/2-1.4/2-1.4:1.1/input/input1
hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. USB Deivce] on usb-ehci_hcd-1.4/input1
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to
linux-media@vger.kernel.org):
90173108f25ee792a5c3595c5467fb9a9c8d8a73 rename v4l2 some more func
aba254366fa2c9446165f916917aee27162cb354 rename v4l2 some more func
ff7c56ae372c05845f30415a4ef264b34bedb4ac rename v4l2 some more func
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to
linux-media@vger.kernel.org):
90173108f25ee792a5c3595c5467fb9a9c8d8a73 rename v4l2 some more func
aba254366fa2c9446165f916917aee27162cb354 rename v4l2 some more func
ff7c56ae372c05845f30415a4ef264b34bedb4ac rename v4l2 some more func
usb 2-1.4: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
usb 2-1.4: bh_dvb_usb_v2: found a 'ITE 9135(9006) Generic' in cold state
usb 2-1.4: bh_dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
usb 2-1.4: dvb_usb_af9035: firmware version=3.39.1.0
usb 2-1.4: bh_dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
usb 2-1.4: dvb_usb_af9035: [0] overriding tuner from 00 to 60
usb 2-1.4: bh_dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (ITE 9135(9006) Generic)
i2c i2c-4: af9033: firmware version: LINK=0.0.0.0 OFDM=3.9.1.0
usb 2-1.4: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
usbcore: registered new interface driver dvb_usb_af9035
root@vusolo2:~#