Vu duo work only old image

[Ev0]

Hello again,
Thanks for reopen this thread.
I put few image from clone site and all work. Then I put last BH image from here - 3.0.2F and all it's ok. I made online update and It works without problems.
Maybe was a problems with CFE or flash memory. I dont know.

In future, only use images from image team boards (such as this site), that way you won't run into trouble, you could have easily caused problems using clone images on a genuine box.

There is a plugin to verify genuine vu+?

Not anymore

 

[bibic]

First time I used original image, but without success. I tryed old image (2010) and was work. Then I try clone image and all was work and I concluded that I have a clone receiver. Now I have last black hole image. Strange problems!

 

[bibic]

I think it's a hardware problem. After update I use only scart. Today I move receiver on another location and I conected receiver on hdmi cable; no video on hdmi. I put scart cable and was ok. I try tu put another image and problems occurred again.
Bad news!

 

[Mick12334]

Did you set your video options, for HDMI, and for the correct resolution?

 

[bibic]

Of course. I have some experience. With old image i'm not have sound on hdmi - only dvi option. With last image logo retate forever; I cant setting anything.

 

[bibic]

The same error;

[CI]: registered ci0
[CI]: registered ci1
[DFP]: registered dbox fp
[DFP]: bcm7335_i2c_write: Error 1114113

[DFP]: Scart 9597 is found 4

[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
zram: module is from the staging directory, the quality is unknown, you have bee n warned.
zram: Created 2 device(s) ...
Adding 33040k swap on /dev/zram0. Priority:-1 extents:1 across:33040k SS
Adding 33040k swap on /dev/zram1. Priority:-2 extents:1 across:33040k SS
NET: Registered protocol family 10
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[CI]:ci_dev_open

[CI]:Opening A GPIO's for 7335 platform

[CI]:Opening A GPIO's for 7335 platform....done

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card insertion status changed

[CI]:Opening B GPIO's for 7335 platform

[CI]:Opening B GPIO's for 7335 platform....done

[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card B insertion status changed

[CI]: CI interface initialised

[CI]:ci1_dev_open

[CI]:NEXUS_Remux_Start CI0 0 0

[CI]:>>close_mpod tuner:0

[CI]:remux stop

[CI]:get_remux_startcnt() count : 1

[CI]:get_remux_startcnt() count : 1

[CI]:>>close_mpod tuner:1

[CI]:remux stop

[CI]:get_remux_startcnt() count : 0

[CI]:get_remux_startcnt() count : 0

fuse init (API version 7.21)
CPU 0 Unable to handle kernel paging request at virtual address 00000028, epc == e07a1e0c, ra == e07a2554
Oops[#1]:
Cpu 0
$ 0 : 00000000 30008700 e07a1e0c 00000000
$ 4 : 00000000 30008701 00000249 0040022c
$ 8 : 00000018 802b80b8 00000000 00000000
$12 : ffffff00 00000000 00000000 005b0000
$16 : 00000002 e07a252c e07a24d4 00000002
$20 : e07a2490 74182508 777379f0 74175b10
$24 : 00000000 e07cacc8
$28 : 85c3a000 85c3bde8 76d66990 e07a2554
Hi : 00000000
Lo : 00000198
epc : e07a1e0c NEXUS_Gpio_Close_impl+0x0/0x8c [dvb_bcm7335]
Tainted: P C O
ra : e07a2554 NEXUS_Gpio_Close+0x28/0x3c [dvb_bcm7335]
Status: 30008703 KERNEL EXL IE
Cause : 00800008
BadVA : 00000028
PrId : 0002a044 (Brcm4380)
Modules linked in: fuse nfsd exportfs autofs4 ipv6 zram(C) brcmfb(O) dvb_bcm7335 (PO) procmk(O) isofs udf ext2
Process enigma2 (pid: 897, threadinfo=85c3a000, task=85c10de0, tls=77f676a0)
Stack : 866f65c0 e07830e0 00000000 00000022 00000000 85c3be18 00000002 e0783928
00000061 e07830a0 e0c1be1c e0783b38 00000002 00000001 00000000 0000000 0
00000000 00000000 e0c044b4 00000004 e0c044b4 0055026c 00000004 0055026 c
74182508 e0780a54 8847a000 800359a4 805e1d10 00000001 87f09500 866f65c 0
0055026c 8012b8e0 00000041 80652640 8065dd94 806c7578 00000001 0000000 1
...
Call Trace:
[<e07a1e0c>] NEXUS_Gpio_Close_impl+0x0/0x8c [dvb_bcm7335]
[<e07a2554>] NEXUS_Gpio_Close+0x28/0x3c [dvb_bcm7335]
[<e0783928>] max9597_enable_output+0x9c/0x20c [dvb_bcm7335]
[<e0780a54>] cleanup_procfs_stb_video+0x432c/0x55d0 [dvb_bcm7335]
[<8012b8e0>] proc_file_write+0x80/0xe8
[<80126a54>] proc_reg_write+0x84/0xd8
[<800c952c>] vfs_write+0x9c/0x184
[<800c9864>] sys_write+0x58/0xbc
[<8000e488>] stack_done+0x20/0x44


Code: 27391428 03200008 00002821 <8c850028> 27bdffe8 afb00010 afbf0014 10a0 0007 00808021
---[ end trace 7d810f4e885de5cf ]---

 

[bibic]

Maybe jtag help me?

 

[bibic]

IEZ-USB FX2LP CY7C68013A USB core board development board - this is OK for jtag?