No, it's not a configuration issue. Sometimes it has happened to me too that the FTP service stopped working. I manage to fix it without reinstalling the image and flashing the only kernel, but it's quit experimental
You need to reflash the image, otherwise, saving your settings. There is not only DCC in this world, anyway. Under win you can also try dreamboxedit or, even better (if it's still working), the Open Webinterface and its bouquet editor.
Thanks Alexwilmac! and how do I do to install only the Kernel? for now the Open WebIf allowed me to backup my channel list, thanks for the tip what about the other config files?
The "only kernel" is a procedure I haven't repeated for a long, long, time, especially with BH.
So, I don't want responsibility for that!!! Anyway, if it got wrong, you'll always have the chance of a complete reflash.
To flash only the kernel you have to prepare a usb flashdrive the same way as for a complete flash but then you must remove the file containing the root (root_cfe_auto.bin or rootfs.tar.bz2 or similar names).
This way you won't loose neither your settings (channels) nor the plugins.
Instead, if you want to reflash from scratch, I don't recommend (especially with BH) the so called "personal backup" which should backup also the plugins. It has never worked 100% for me.
I much prefer to reinstall the plugins: few minutes of your time but everything is then perfectly working.
It´s not possible to reflsah only the kernel, if the image is running in OpenMultiboot and not in the Flash.
best regards
nunigaia
I assumed, from post #5, that he tried in multiboot another image, as he's got BH installed in flash.
Can you confirm this is your configuration, Peitacas? Otherwise, what Nunigaia says is true!
Hello both,
BH is on the flash.
Thanks
Helllo Nunigaia,
it is the 3.0.5.L
keep in mind it was working perfectly 2 weeks ago when I have updated the channel list for the last time.
Regards
reboot.update
kernel_auto.bin
How did you update your channel list?
Just reflash the box with "ONLY" the following 2 files, but don´t forget to maintain the directory structure intact at the root of the USB device ( Pen drive ) as:
View attachment 39193
Code:reboot.update kernel_auto.bin
1) If you have on your PC the BlackHole Image that you have flashed your STB, use it ... otherwise, download from our server.
2) Unzip to a folder to your PC ... and copy the vuplus folder to the root of your Pen drive previously initialized as Fat32 FS.
3) Erase the files not needed.
best regards
nunigaia
E-Channelizer
done, but still the error 10057